Updates to New Hampshire’s “Dealer Bill of Rights”: What Equipment Manufacturers Need to Know

by Foley & Lardner LLP
Contact

After two years of litigation, Senate Bill 126, which amended New Hampshire’s Motor Vehicle Franchise Act — the so-called “Auto Dealer’s Bill of Rights” (codified at RSA 357-C) — has survived scrutiny by the New Hampshire Supreme Court. On December 29, 2015, the court affirmed the trial court’s decision that regulating farm, industrial, construction, forestry, and yard and garden equipment dealerships under the same statutory scheme as motor vehicle dealerships are regulated did not violate the Contracts Clause of the State or Federal Constitutions.

As a refresher, in July of 2013, New Hampshire enacted SB 126, which amended RSA 357-C by including “equipment” in the definition of “motor vehicle .” Under SB 126, “equipment” means “farm and utility tractors, forestry equipment, industrial equipment, construction equipment, farm implements, farm machinery, yard and garden equipment, attachments, accessories and repair parts.” RSA 357-C:1. SB 126 marked a radical change in the method of regulating equipment manufacturer/dealer relationships. For instance, it prohibits an equipment manufacturer from competing with a dealer, directly or indirectly through affiliates, except in limited circumstances. RSA 357-C:3, III. It also requires an equipment manufacturer to prove to the Motor Vehicle Industry Board that there is “good cause” for termination or failure to renew a current dealer, or appointment of a new dealer in an existing dealer’s territory, regardless of whether the existing dealer’s territory is non-exclusive. RSA 357-C:7, I(d)(1); C:9. These are requirements that actual motor vehicle manufacturers (like Ford and GM) have had to contend with for some time, but are brand new for equipment manufacturers. For that reason, SB 126 was challenged by equipment manufacturers the moment it was signed into law.

What Equipment Manufacturer’s Need to Know About SB 126

Legal challenges having essentially concluded in the recent Stihl, Inc. v. State of N. H. and Deere & Co. et al. v. State of N.H. decisions , here’s what equipment manufacturers should know.

SB 126 is retroactive, and therefore applies to existing dealer agreements, as well as future agreements. The primary challenge asserted by equipment manufacturers was that SB 126 unconstitutionally impairs existing contracts. Citing to the equipment dealer laws of several other states, the Supreme Court rejected this argument, holding that the purpose of SB 126 “to protect equipment dealers and consumers from perceived abusive and oppressive acts by manufacturers is unquestionably a significant and legitimate public purpose” and therefore survives constitutional scrutiny. Deere & Co. et al. v. State of N.H., N.H. (decided Dec. 29, 2015), at 10. “[E]liminating unfair methods of competition and deceptive business practices can foster ‘a salubrious and more stable business climate’” benefitting consumers and the state’s economy more generally. Id. at 12. That said, the court declined to second-guess the evidentiary predicate on which the legislature based its directive (that the relationship between car/truck dealers and manufacturers was identical to that of equipment dealers and manufacturers), or the legislature’s view as to the reasonableness or necessity of the law. Id. at 12-13.

However, SB 126 applies only to equipment with “an engine, wheels and transmissions” or attachments to such equipment. One argument made by the state that snapped under the weight of common sense was that the term “motor vehicle” as used in SB 126 included equipment like hand held tools, garden hoses, etc. According to the court, applying SB 126 to companies that do not make products akin to actual “motor vehicles” would produce “untoward outcomes.”

For example, under the state’s construction of the statute, a small company that makes only hand-held equipment, such as hammers, rakes, or garden hoses, and sells those products through dealers, such as hardware stores, would be regulated by the New Hampshire Motor Vehicle Industry Board (Board). See RSA 357-C:12, I (2009). Before being able to sell its products to a new hardware store, the company would be required to notify the board and any other dealers in such equipment located in “the relevant market area.” See RSA 357-C:9, I (Supp. 2014). If another dealer objected, the board could approve sales at the new location only after evaluating, among other things, “[w]hether the new [equipment] dealers of the same line make in that relevant market area are providing adequate competition and convenient consumer care for the [equipment] of the line make in the market area” and the “[g]rowth or decline in population and new [equipment] registration in the relevant market area.” RSA 357-C:9, II (Supp. 2014). We cannot imagine that the legislature intended for the board to make this type of evaluation concerning hand-held equipment, such as hammers, rakes, and garden hoses.

Stihl, Inc. v. State of N. H., 168 N.H. (decided Oct. 27, 2015) at 7-8.

Instead, the court agreed that “when the legislature moved RSA chapter 347-A into the motor vehicle provision, it intended to regulate only those manufacturers that produce equipment and related accessories that are analogous to automobiles, in that they have engines, wheels, and transmissions.” Id. Any other interpretation would lead to “absurd results.” Id.

Equipment manufacturers subject to the law should include broad arbitration clauses in their contracts with dealers. Finally, the court affirmed that SB 126’s provision declaring broad arbitration provisions to be an unfair business practice contradicted the Federal Arbitration Act, and therefore is preempted by the Supremacy Clause. See Deere & Co. et al., N.H. at 15-16. But the court punted on the question of whether a broad arbitration clause could require a dealer to submit a dispute to arbitration as opposed to resorting to the Motor Vehicle Industry Board. Given this, having broad arbitration language in dealer contracts is even more important; a manufacturer (especially an out-of-state one) would much rather have a neutral arbitrator decide a dispute than a state-run administrative board. Where there is a venue dispute, whether arbitration can be compelled will likely turn on justiciability.

In sum, SB 126 represents a further incursion into the relationships between equipment manufacturers and dealers to address “perceived” abuses by manufacturers. The court did leave open the possibility (theoretical) that the law could be struck down under the dormant commerce clause, but the likelihood of that happening is slim. Whether SB 126 represents the next step in the evolution of equipment dealer laws remains to be seen. Equipment manufacturers should pay close attention to upcoming legislative sessions, especially in the states in which they are based and have the best chance of being heard.

 

DISCLAIMER: Because of the generality of this update, the information provided herein may not be applicable in all situations and should not be acted upon without specific legal advice based on particular situations.

© Foley & Lardner LLP | Attorney Advertising

Written by:

Foley & Lardner LLP
Contact
more
less

Foley & Lardner LLP on:

Readers' Choice 2017
Reporters on Deadline

"My best business intelligence, in one easy email…"

Your first step to building a free, personalized, morning email brief covering pertinent authors and topics on JD Supra:
Sign up using*

Already signed up? Log in here

*By using the service, you signify your acceptance of JD Supra's Privacy Policy.
Custom Email Digest
Privacy Policy (Updated: October 8, 2015):
hide

JD Supra provides users with access to its legal industry publishing services (the "Service") through its website (the "Website") as well as through other sources. Our policies with regard to data collection and use of personal information of users of the Service, regardless of the manner in which users access the Service, and visitors to the Website are set forth in this statement ("Policy"). By using the Service, you signify your acceptance of this Policy.

Information Collection and Use by JD Supra

JD Supra collects users' names, companies, titles, e-mail address and industry. JD Supra also tracks the pages that users visit, logs IP addresses and aggregates non-personally identifiable user data and browser type. This data is gathered using cookies and other technologies.

The information and data collected is used to authenticate users and to send notifications relating to the Service, including email alerts to which users have subscribed; to manage the Service and Website, to improve the Service and to customize the user's experience. This information is also provided to the authors of the content to give them insight into their readership and help them to improve their content, so that it is most useful for our users.

JD Supra does not sell, rent or otherwise provide your details to third parties, other than to the authors of the content on JD Supra.

If you prefer not to enable cookies, you may change your browser settings to disable cookies; however, please note that rejecting cookies while visiting the Website may result in certain parts of the Website not operating correctly or as efficiently as if cookies were allowed.

Email Choice/Opt-out

Users who opt in to receive emails may choose to no longer receive e-mail updates and newsletters by selecting the "opt-out of future email" option in the email they receive from JD Supra or in their JD Supra account management screen.

Security

JD Supra takes reasonable precautions to insure that user information is kept private. We restrict access to user information to those individuals who reasonably need access to perform their job functions, such as our third party email service, customer service personnel and technical staff. However, please note that no method of transmitting or storing data is completely secure and we cannot guarantee the security of user information. Unauthorized entry or use, hardware or software failure, and other factors may compromise the security of user information at any time.

If you have reason to believe that your interaction with us is no longer secure, you must immediately notify us of the problem by contacting us at info@jdsupra.com. In the unlikely event that we believe that the security of your user information in our possession or control may have been compromised, we may seek to notify you of that development and, if so, will endeavor to do so as promptly as practicable under the circumstances.

Sharing and Disclosure of Information JD Supra Collects

Except as otherwise described in this privacy statement, JD Supra will not disclose personal information to any third party unless we believe that disclosure is necessary to: (1) comply with applicable laws; (2) respond to governmental inquiries or requests; (3) comply with valid legal process; (4) protect the rights, privacy, safety or property of JD Supra, users of the Service, Website visitors or the public; (5) permit us to pursue available remedies or limit the damages that we may sustain; and (6) enforce our Terms & Conditions of Use.

In the event there is a change in the corporate structure of JD Supra such as, but not limited to, merger, consolidation, sale, liquidation or transfer of substantial assets, JD Supra may, in its sole discretion, transfer, sell or assign information collected on and through the Service to one or more affiliated or unaffiliated third parties.

Links to Other Websites

This Website and the Service may contain links to other websites. The operator of such other websites may collect information about you, including through cookies or other technologies. If you are using the Service through the Website and link to another site, you will leave the Website and this Policy will not apply to your use of and activity on those other sites. We encourage you to read the legal notices posted on those sites, including their privacy policies. We shall have no responsibility or liability for your visitation to, and the data collection and use practices of, such other sites. This Policy applies solely to the information collected in connection with your use of this Website and does not apply to any practices conducted offline or in connection with any other websites.

Changes in Our Privacy Policy

We reserve the right to change this Policy at any time. Please refer to the date at the top of this page to determine when this Policy was last revised. Any changes to our privacy policy will become effective upon posting of the revised policy on the Website. By continuing to use the Service or Website following such changes, you will be deemed to have agreed to such changes. If you do not agree with the terms of this Policy, as it may be amended from time to time, in whole or part, please do not continue using the Service or the Website.

Contacting JD Supra

If you have any questions about this privacy statement, the practices of this site, your dealings with this Web site, or if you would like to change any of the information you have provided to us, please contact us at: info@jdsupra.com.

- hide
*With LinkedIn, you don't need to create a separate login to manage your free JD Supra account, and we can make suggestions based on your needs and interests. We will not post anything on LinkedIn in your name. Or, sign up using your email address.