News & Analysis as of

3D Printing

Patenting And The New FDA Guidance On 3-D Printing Of Medical Devices

The U.S. Food and Drug Administration (FDA) recently finalized its publication on additive manufacturing (commonly referred to as 3-D printing) for medical devices. According to FDA Commissioner Scott Gottlieb, the guidance...more

Global IP outlook 2018

by Hogan Lovells on

2017 was a year of widespread political, technological, and legal changes; leading to lack of certainty and creating both challenges and opportunities for businesses in 2018 and beyond. Please see full Publication below...more

3D Printing Meets Medical Devices: FDA Weighs In On Additive Manufacturing

In December, the U.S. Food and Drug Administration (FDA) issued guidance on Technical Considerations for Additive Manufactured Medical Devices. The guidance represents FDA’s efforts to provide regulatory direction about...more

FDA Presents Webinar on Technical Considerations for Additive Manufactured Medical Devices

by Reed Smith on

On December 5, 2017, the U.S. Food and Drug Administration (FDA) released the final version of its guidance entitled “Technical Considerations for Additive Manufactured Medical Devices; Guidance for Industry and Food and Drug...more

TMT Horizons 2018

by Hogan Lovells on

Some of the 800+ Hogan Lovells lawyers who look at the TMT Industry Sector share their perspectives on the future. From Tokyo to Mexico; from Blockchain to satellites; from M&A to privacy. Please see full Publication below...more

FDA finalizes 3D printing guidance

by Hogan Lovells on

On December 5, 2017, the U.S. Food and Drug Administration (FDA or the Agency) finalized its “leapfrog guidance” entitled, “Technical Considerations for Additive Manufactured Devices”. Please see full Publication below for...more

Profiles In Innovation: Editor Of Wired Discusses AI, Blockchain, And Tech Trends

by Orrick - IP Landscape on

Wired’s editor-in-chief Nicholas Thompson is interviewed by Orrick on tech trends with commentary by Annette Hurst, IP attorney on AI legal considerations. Please see full Publication below for more information. ...more

3D Printed Medical Implants: Should Laws and Regulations Be Revolutionized to Address This Revolutionary Customized Technology?

by Wilson Elser on

Previously on this blog, Wilson Elser attorneys have written several posts about 3D printing technology and the law. We have predicted that this new technology has the potential to change the landscape of product liability...more

Aviations Happenings - Winter 2017

In this issue - 3D Printing: Not Your Old Dot Matrix Printer! - • District Court Again Upholds $2.8 Million Verdict Against Engine Manufacturer in Plane Crash Litigation - • Nebraska Supreme Court Upholds Defense...more

FDA Provides Guidance on 3D-Printed Medical Device Products

by Knobbe Martens on

The U.S. Food and Drug Administration released finalized guidance regarding 3D printing in medical devices. The guidance document, which issued on December 5, 2017, is based on the FDA’s review of more than 100 devices...more

Trade & Manufacturing Alert - December 2017

by King & Spalding on

“Core Elements” Of TPP-11 Agreement Reached In Vietnam - On November 10, 2017, Trade Ministers from the eleven remaining Trans-Pacific Partnership (TPP) countries (minus the United States) announced that they had reached...more

Trade & Manufacturing - News of Note - December 2017

by King & Spalding on

Canada Requests WTO Consultations And Files Notice Of Intent To Seek NAFTA Chapter 19 Binational Panel Review In Softwood Lumber Case - Canada has taken steps to pursue parallel WTO and NAFTA actions to challenge the U.S....more

Guest post – Observations on FDA 3D Printing Guidance

by Reed Smith on

A lot has happened over the past 19 months, some good, some bad, and some just unbelievable. To name a few, and without sounding like a remake of We Didn’t’ Start the Fire, a total solar eclipse, a new human organ was...more

FDA Guidance Offers Initial Thoughts on Technical Considerations Specific to Medical Devices Using 3D Printing

by Reed Smith on

The U.S. Food and Drug Administration (FDA) announced the availability of its guidance entitled “Technical Considerations for Additive Manufactured Medical Devices; Guidance for Industry and Food and Drug Administration...more

Legal Issues in Additive Manufacturing Technology – Peeling Back the Layers

The Fourth Industrial Revolution is the term coined by Klaus Schwab, the founder and executive chairman of the World Economic Forum, to describe the fourth major industrial era since the first industrial revolution which took...more

3D Printing Quarterly Report - Q3 2017

by Benesch on

Twenty-five percent of world trade could be wiped out by 2060 as result of 3D printing technology: ING - According to estimates provided by a report from ING, progress in 3D printing technology will see one-quarter of...more

Aviations Happenings - Fall 2017

The Fall 2017 edition of Schnader’s Aviation Group newsletter examines some of the most recent and relevant cases and developments in aviation law, including: ·$2.8 Million Verdict Upheld Against Engine...more

EIT Acquires Patent Portfolio For 3D Printed Spinal Fusion Cages

by Knobbe Martens on

On August 22, 2017, Emerging Implant Technologies GmbH (EIT) announced the acquisition of 22 patents and pending applications relating to 3D printed expandable spinal fusion cages based on living hinges from Dr. Morgan Lorio,...more

Study Examines How to Reduce Nanoparticle Emissions during 3D Printing

by Bergeson & Campbell, P.C. on

On August 30, 2017, Environmental Science & Technology, an American Chemical Society (ACS) publication, published a study entitled “Characterization and Control of Nanoparticle Emission during 3D Printing.” According to the...more

IP is at the heart of life sciences innovation

by Hogan Lovells on

In recent years, technology and innovation has advanced at an unprecedented pace. Flying taxi drones, self-driving cars and 3D-printers immediately come to mind. However, exciting progress has been made in life sciences and...more

MRI-Compatible Robot Aims to Improve Breast Cancer Biopsies

by Knobbe Martens on

The University of Twente in Enschede, Netherlands recently introduced “the world’s smallest and most accurate 3D-printed biopsy robot,” called the Stormram 4. The device is designed to carry out biopsies during breast cancer...more

3D Printing Patent Landscape

The field of 3D printing has been growing rapidly for years. It has applications in many areas of life and the economy, such as healthcare, aerospace, and parts replacement. 3D printing also reshapes supply chains and...more

The Growing Role of 3D Printing in the Sports and Fitness Industries

As a general overview, 3D printing involves turning a 3D digital model created on a computer or with a 3D scanner into a physical object, allowing users to make almost anything. Originally published in Sports & Fitness...more

3D Printing Quarterly Report - Q1 2017

by Benesch on

IDC forecasts that worldwide spending on 3D printers, along with associated software, materials and services, will reach $28.9 billion in 2020, compared to an estimated $13.2 billion in 2016. It’s expected that the...more

Legal aspects of 3D printing - Today, 3D printing is one of the technologies that is rapidly gaining momentum and being applied in...

by Dentons on

Today, 3D printing is one of the technologies that is rapidly gaining momentum and being applied in various fields. The possibility of printing physical objects based on their digital models appeared back in the 1980s1,...more

127 Results
|
View per page
Page: of 6
Cybersecurity

"My best business intelligence,
in one easy email…"

Your first step to building a free, personalized, morning email brief covering pertinent authors and topics on JD Supra:
Sign up using*

Already signed up? Log in here

*By using the service, you signify your acceptance of JD Supra's Privacy Policy.
*With LinkedIn, you don't need to create a separate login to manage your free JD Supra account, and we can make suggestions based on your needs and interests. We will not post anything on LinkedIn in your name. Or, sign up using your email address.